2023 Updated JN0-636 PDF for the JN0-636 Tests Free Updated Today!
Fully Updated Dumps PDF - Latest JN0-636 Exam Questions and Answers
Juniper JN0-636 (Security, Professional (JNCIP-SEC)) certification exam is a highly regarded certification in the field of network security. JN0-636 exam is designed to test the skills and knowledge of network security professionals who are responsible for implementing and managing Juniper Networks security solutions. JN0-636 exam covers a wide range of topics including security policies, firewall filters, virtual private networks, intrusion detection and prevention, and security management.
NEW QUESTION # 79
Which configurable SRX Series device feature allows you to capture transit traffic?
- A. syslog
- B. traceoptions
- C. packet-capture
- D. archival
Answer: B
NEW QUESTION # 80
Which two features would be used for DNS doctoring on an SRX Series firewall? (Choose two.)
- A. The DNS ALG must be disabled.
- B. source NAT
- C. static NAT
- D. The DNS ALG must be enabled.
Answer: A,B
NEW QUESTION # 81
The exhibit shows a snippet of a security flow trace. In this scenario, which two statements are correct? (Choose two.)
- A. The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.
- B. An existing session is found in the table.
- C. This packet arrived on interface ge-0/0/4.0.
- D. Destination NAT occurs.
Answer: A,B
NEW QUESTION # 82
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- B. Juniper Networks will investigate false positives generated by this custom feed.
- C. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
- D. Juniper Networks will not investigate false positives generated by this custom feed.
Answer: C,D
NEW QUESTION # 83
You configured a chassis cluster for high availability on an SRX Series device and enrolled this HA cluster with the Juniper ATP Cloud. Which two statements are correct in this scenario? (Choose two.)
- A. You must use different license keys on both cluster nodes.
- B. When enrolling your devices, you only need to enroll one node.
- C. You must use the same license key on both cluster nodes.
- D. You must set up your HA cluster after enrolling your devices with Juniper ATP Cloud
Answer: C,D
NEW QUESTION # 84
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet matches a configured security policy.
- B. The packet matches the default security policy.
- C. The packet is processed as host inbound traffic.
- D. The packet is processed in the first path packet flow.
Answer: B,C
NEW QUESTION # 85
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
- B. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- C. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
- D. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
Answer: A,C
NEW QUESTION # 86
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.
- B. The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.
- C. Juniper ATP Cloud automatically creates the 3uopi'cioua_Endpoints feed after you commit the security policy.
- D. The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1
Answer: B,D
NEW QUESTION # 87
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.
- A. You can use SPKI to accomplish this behavior.
- B. You can use SCEP to accomplish this behavior.
- C. You can use OCSP to accomplish this behavior.
- D. You can use CRL to accomplish this behavior.
Answer: B
Explanation:
Certificate Renewal The renewal of certificates is much the same as initial certificate enrollment except you are just replacing an old certificate (about to expire) on the VPN device with a new certificate. As with the initial certificate request, only manual renewal is supported. SCEP can be used to re-enroll local certificates automatically before they expire. Refer to Appendix D for more details.
NEW QUESTION # 88
You are asked to configure a new SRX Series CPE device at a remote office. The device must participate in forwarding MPLS and IPsec traffic.
Which two statements are true regarding this implementation? (Choose two.)
- A. Host inbound traffic must be processed by the flow module
- B. A firewall filter must be configured to enable packet mode forwarding
- C. Host inbound traffic must not be processed by the flow module
- D. The SRX Series device can process both MPLS and IPsec with default traffic handling
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-packet-based- forwarding.html
NEW QUESTION # 89
The highlighted incident (arrow) shown in the exhibit shows a progression level of "Download" in the kill chain.
What are two appropriate mitigation actions for the selected incident? (Choose two.)
- A. Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.
- B. Immediate response required: Wipe infected endpoint hosts.
- C. Immediate response required: Block malware IP addresses (download server or CnC server)
- D. Not an urgent action: Use IVP to confirm if machine is infected.
Answer: B,D
NEW QUESTION # 90
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights. What would you use to assist your SRX series devices to accomplish this task?
- A. Junos Space
- B. JSA
- C. JIMS
- D. JATP Appliance
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth- configure-jims.html
NEW QUESTION # 91
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of two interfaces.
- B. The collector must have a minimum of four interfaces.
- C. The collector must have a minimum of three interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-
independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION # 92
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is explicitly rejected.
- B. The packet is part of a new session.
- C. The packet is part of an existing session.
- D. The packet is silently discarded.
Answer: A,B
NEW QUESTION # 93
You want to use selective stateless packet-based forwarding based on the source address.
In this scenario, which command will allow traffic to bypass the SRX Series device flow daemon?
- A. set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless
- B. set firewall family inet filter bypaa3_flowd term t1 then skip-services accept
- C. set firewall family inet filter bypass_flowd term t1 then routing-instance stateless
- D. set firewall family inet filter bypass__f lowd term t1 then packet-mode
Answer: B
NEW QUESTION # 94
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. OSPF
- B. shortcut suggester
- C. BGP
- D. shortcut partner
- E. IKEv1
Answer: A,B,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery- vpns.html
NEW QUESTION # 95
Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface?
(Choose three.)
- A. IPsec
- B. OSPF
- C. DHCP
- D. IBGP
- E. NTP
Answer: A,B,E
NEW QUESTION # 96
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- C. The fxp0 IP address is not routable
- D. A firewall is blocking HTTPS on fxp0
Answer: B
NEW QUESTION # 97
Exhibit
You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The SRX device is changing the source address on this packet from
- B. This packet is part of an existing session.
- C. This is the first packet in the session
- D. The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.
Answer: C,D
NEW QUESTION # 98
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Enable JTAC remote access
- B. Create a temporary root account.
- C. Enable a JATP support account.
- D. Enable remote support.
- E. Create a temporary admin account.
Answer: C,D,E
Explanation:
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION # 99
You are asked to ensure that your IPS engine blocks attacks. You must ensure that your system continues to drop additional malicious traffic without additional IPS processing for up to 30 minutes. You must ensure that the SRX Series device does send a notification packet when the traffic is dropped.
Which statement is correct?
- A. Use the IP-Close action.
- B. Use the Drop Packet action.
- C. Use the Drop Connection action.
- D. Use the IP-Block action.
Answer: A
NEW QUESTION # 100
Exhibit
You areasked to establish an IBGP peering between the SRX Series device and the router, but the session is not being established. In the security flow trace on the SRX device, packet drops are observed as shown in the exhibit.
What is the correct action to solve the problem on the SRX device?
- A. Create a firewall filter to accept the BGP traffic
- B. Modify the security policy to allow the BGP traffic.
- C. Add BGP to the Allowed host-inbound-traffic for the interface
- D. Configure destination NAT for BGP traffic.
Answer: A
NEW QUESTION # 101
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
- B. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- C. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
- D. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
Answer: A,C
NEW QUESTION # 102
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. transparent mode
- B. global mode
- C. private mode
- D. Layer 3 mode
Answer: A,D
NEW QUESTION # 103
What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).
- A. Analysis
- B. Statistics
- C. Filtration
- D. Detection
Answer: A,D
Explanation:
https://www.juniper.net/us/en/products-services/security/advanced-threat-prevention/
NEW QUESTION # 104
......
Juniper JN0-636 Exam is a professional-level certification program that tests the skills and knowledge of security professionals in managing and configuring Juniper Networks security products. JN0-636 exam is comprehensive and covers a range of topics related to security policies, firewall security, virtual private networks (VPNs), intrusion prevention, unified threat management (UTM), and security management. JN0-636 exam is suitable for professionals who have at least three years of experience in network and security operations and want to become a certified Juniper Networks security expert.
To earn the JN0-636 certification, candidates must pass a rigorous exam that covers a wide range of security topics, including advanced security technologies, security policies and procedures, security management, and network security design. JN0-636 exam is designed to test the candidate's ability to implement, configure, and troubleshoot Juniper Networks security solutions in complex network environments. Successful candidates will have demonstrated their ability to design and implement secure networks that protect against a wide range of threats, including malware, hacking, and data breaches. The JN0-636 certification is a valuable credential for IT professionals who want to advance their careers in network security and demonstrate their expertise in Juniper Networks security technologies.
Free JN0-636 Exam Questions JN0-636 Actual Free Exam Questions: https://actualtests.passsureexam.com/JN0-636-pass4sure-exam-dumps.html