200-301 100% Guarantee Download 200-301 Exam PDF Q&A [Sep 17, 2022]
Get 200-301 Actual Free Exam Q&As to Prepare for Your Cisco Certification
NEW QUESTION 346
Refer to the topology shown in the exhibit.
Which ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three.)
- A. Switch A - Fa0/0
- B. Switch B - Fa0/0
- C. Switch C - Fa0/0
- D. Switch C - Fa0/1
- E. Switch B - Fa0/1
- F. Switch A - Fa0/1
Answer: B,E,F
NEW QUESTION 347
What is a function of a remote access VPN?
- A. establishes a secure tunnel between two branch sites
- B. uses cryptographic tunneling to protect the privacy of data for multiple users simultaneously
- C. uses exclusively when a user is connected to a company's internal network
- D. allows the users to access company internal network resources through a secure tunnel
Answer: D
Explanation:
Section: Security Fundamentals
NEW QUESTION 348
Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?
- A. lldp reinit
- B. lldp holdtimt
- C. lldp tlv-select
- D. lldp timer
Answer: A
Explanation:
Reference:
+ lldp holdtime seconds: Specify the amount of time a receiving device should hold the information from your device before discarding it + lldp reinit delay: Specify the delay time in seconds for LLDP to initialize on an interface + lldp timer rate: Set the sending frequency of LLDP updates in seconds
NEW QUESTION 349
Drag and drop the facts about wireless architectures from the left onto the types of access point on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 350
Which statement identifies the functionality of virtual machines?
- A. Each hypervisor can support a single virtual machine and a single software switch
- B. Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor
- C. The hypervisor can virtualize physical components including CPU. memory, and storage
- D. The hypervisor communicates on Layer 3 without the need for additional resources
Answer: C
NEW QUESTION 351
Refer to the exhibit.
An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?
- A. 172.23.104.4
- B. 172.23.103.10
- C. 10.4.4.4
- D. 10.4.4.5
Answer: A
NEW QUESTION 352
What are two differences between optical-fiber cabling and copper cabling? (Choose two.)
- A. Light is transmitted through the core of the fiber
- B. A BNC connector is used for fiber connections
- C. The glass core component is encased in a cladding
- D. The data can pass through the cladding
- E. Fiber connects to physical interfaces using RJ-45 connections
Answer: A,C
Explanation:
Section: Network Fundamentals
NEW QUESTION 353
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Answer:
Explanation:
NEW QUESTION 354
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received interface counter increments?
- A. collision
- B. CRC
- C. late collision
- D. runt
Answer: C
NEW QUESTION 355
What two actions can be taken to secure the virtual teminal interfaces on a router? (choose two)
- A. Administratively shut down the interface
- B. Enter an access list and apply it to the virtual terminal interfaces using the access-class command
- C. Configure a virtual terminal password and logi process
- D. Physically secure the interface
- E. Create an access list and apply it to the virtual terminal interfaces using the access-group command
Answer: B,C
NEW QUESTION 356
Which type of network attack overwhelms the target server by sending multiple packets to a port until the half-open TCP resources of the target are exhausted?
- A. reflection
- B. teardrop
- C. SYIM flood
- D. amplification
Answer: C
NEW QUESTION 357
which command can you enter on a Cisco IOS device to enable a scheduled algorithm that directs lookup calls to multiple DNS hosts?
- A. ip domain list
- B. ip name-server 192.168.10.14 192.168.10.15
- C. ip domain lookup
- D. ip domain round-robin
Answer: B
NEW QUESTION 358
Refer to the exhibit.
which path is used by the router for internet traffic ?
- A. 0.0.0.0/0
- B. 10.10.13.0/24
- C. 209.165.200.0/27
- D. 10.10.10.0/28
Answer: A
NEW QUESTION 359
Which two protocols must be disabled to increase security for management connections to a Wireless LAN Controller? (Choose two )
- A. HTTPS
- B. TFTP
- C. SSH
- D. HTTP
- E. Telnet
Answer: D,E
NEW QUESTION 360
An engineer is configuring an encrypted password for the enable command on a router where the local user database has already been configured Drag and drop the configuration commands from the left into the correct sequence on the right Not all commands are used
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION 361
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right
Answer:
Explanation:
NEW QUESTION 362
Refer to the exhibit. Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help resolve the configuration issue?
- A. configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network
- B. set the default gateway as 20.20.20.2
- C. configure a static route with Fa0/1 as the egress interface to reach the 20.20.2.0/24 network
- D. set the default network as 20.20.20.0/24
Answer: A
NEW QUESTION 363
Refer to the exhibit.
What is the effect of this configuration?
- A. The switch discard all ingress ARP traffic with invalid MAC-to-IP address bindings.
- B. All ingress and egress traffic is dropped because the interface is untrusted
- C. All ARP packets are dropped by the switch
- D. Egress traffic is passed only if the destination is a DHCP server.
Answer: A
Explanation:
Explanation
Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.
NEW QUESTION 364
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
Answer:
Explanation:
NEW QUESTION 365
The network administrator cannot to switch 1 over a telnet session, although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.
Given the information in the graphic and assuming that the router and switch2 are configured properly, which of the following commands should be issued on switch 1 to correct this problem?
- A. Switch1(config)# i nterface fa0 /1 Switch1(config-if)# ip address 192.168.24.3.255.255.255.0
- B. Switch1 (config-if)# default-gateway 192.168.24.1
- C. Switch 1 (config)# i nterface fa0 /1 Switch1 (config-if)# duplex full Switch1 (config-if)# speed 100
- D. Switch1 (config)# line con 0 Switch1(config-line)# password cisco Switch1 (config-line)#login
- E. Switch1 (config)# interface fa0/1 Switch1 (config-if)# switchport mode trunk
Answer: B
NEW QUESTION 366
......
200-301 Questions Truly Valid For Your Cisco Exam: https://actualtests.passsureexam.com/200-301-pass4sure-exam-dumps.html