CTS-D 100% Pass Guaranteed Download AVIXA Communications Exam PDF Q&A
CTS-D Practice Test Dumps with 100% Passing Guarantee
AVIXA CTS-D Exam Certification Details:
| Passing Score | 350 / 500 |
| Exam Code | CTS-D |
| Exam Name | AVIXA Certified Technology Specialist - Design (CTS-D) |
| Duration | 180 mins |
| Schedule Exam | Pearson VUE |
| Non-Member Exam Price | $575(USD) |
| Sample Questions | AVIXA CTS-D Sample Questions |
| Number of Questions | 135 |
NEW QUESTION # 82
What are characteristics that could affect an RT60 measurement?
Response:
- A. Luminance ratio, contrast and color temperature
- B. Heat load and air requirements
- C. Absorption, reflection and diffusion
- D. Impedance and power requirements
Answer: C
NEW QUESTION # 83
Which abbreviation on a drawing tells you that you will not need to install a specific display screen?
Response:
- A. OC
- B. OD
- C. NTS
- D. OFOI
Answer: D
NEW QUESTION # 84
Assuming a loudspeaker coverage angle of 90 degrees, a mounted loudspeaker height of 12 feet (3.7 meters), and listeners who are seated, what is the diameter of coverage?
Response:
- A. 16.4 feet (5 meters)
- B. 9 feet (2.7 meters)
- C. 16 feet (4.9 meters)
- D. 15.4 feet (4.7 meters)
Answer: C
NEW QUESTION # 85
Which device is used to extend the distance of an HDMI signal beyond standard cable length limitations?
- A. Switcher
- B. Repeater or extender
- C. Mixer
- D. Amplifier
Answer: B
NEW QUESTION # 86
Which of the following tools is best used to measure acoustic properties in a room?
- A. Multimeter
- B. Sound level meter
- C. Oscilloscope
- D. Signal generator
Answer: B
NEW QUESTION # 87
On what drawings would the projector sight lines be found?
Response:
- A. Elevation drawings
- B. AV system drawings
- C. Facility and architectural drawings
- D. Electrical drawings
Answer: C
NEW QUESTION # 88
When creating a schematic diagram of audio signal flow for a project, what must be included in the diagram?
Response:
- A. Conduit runs, pull boxes, bends
- B. Microphones, mixers, switchers, routers, and processors
- C. Construction materials, wall panels, acoustic tiles
- D. Inputs, outputs, equipment rack locations, ceiling venting
Answer: B
NEW QUESTION # 89
Eighth-order filters are useful as __________.
Response:
- A. Low-pass filters
- B. Notch filters
- C. Shelving filters
- D. Crossover filters
Answer: D
NEW QUESTION # 90
Which of the following best describes "project commissioning" in AV projects?
- A. Installation of AV equipment
- B. Testing and verification of system performance before handover
- C. Training end users
- D. System design
Answer: B
NEW QUESTION # 91
What is the required bandwidth for 4:1:1 progressive digital video signal (1920 × 1080, 8 bits at 30 Hz)?
Response:
- A. 1.49 Gbps
- B. 3.30 Gbps
- C. 746 Mbps
- D. 1.30 Gbps
Answer: C
NEW QUESTION # 92
When producing shop drawings such as AV signal flow diagrams, what should be included?
Response:
- A. Details about the building infrastructure and electrical system
- B. Descriptions of the video feed settings and relays
- C. Vendor details and specifications
- D. Details of equipment configuration and interconnections
Answer: D
NEW QUESTION # 93
Which of the following best describes "gain structure" in audio system design?
- A. The ratio of input to output voltage throughout the signal chain to avoid distortion
- B. The type of speakers used
- C. The number of microphones in a system
- D. The physical size of an amplifier
Answer: A
NEW QUESTION # 94
Which of the following is a common power rating unit used for AV equipment?
- A. Amperes (A)
- B. Ohms (#)
- C. Volts (V)
- D. Watts (W)
Answer: D
NEW QUESTION # 95
Which wireless frequency band is commonly used for video transmission in AV systems?
- A. 60 MHz
- B. 900 MHz
- C. 2.4 GHz and 5 GHz
- D. 700 MHz
Answer: C
NEW QUESTION # 96
What list helps to organize what needs to be done by everyone on the project?
Response:
- A. Materials list
- B. System component list
- C. Control object list
- D. Control functions script
Answer: D
NEW QUESTION # 97
What other type of light, besides light coming directly from a source, must be measured?
Response:
- A. Ambient
- B. Refracted
- C. Distorted
- D. Fluorescent
Answer: A
NEW QUESTION # 98
Where will the floor box dimensional and exact installation information be found?
Response:
- A. Detail drawings
- B. Electrical coordination drawings
- C. Conduit riser diagrams
- D. Floorplan drawings
Answer: A
NEW QUESTION # 99
Which of the following best describes "latency" in AV systems?
- A. Power consumption
- B. Time delay between input and output of a signal
- C. Cable length
- D. Signal strength
Answer: B
NEW QUESTION # 100
What is the standard refresh rate for video in North American AV systems?
- A. 75 Hz
- B. 60 Hz
- C. 120 Hz
- D. 50 Hz
Answer: B
NEW QUESTION # 101
According to best practices what is the safe working load (SWL) requirement for overhead mounting of a 75 pound (33.75 kg) projector?
Response:
- A. 275 pounds (123.75 kg)
- B. 375 pounds (168.75 kg)
- C. 500 pounds (225 kg)
- D. 300 pounds (180 kg)
Answer: B
NEW QUESTION # 102
......
CTS-D PDF Dumps Are Helpful To produce Your Dreams Correct QA's: https://actualtests.passsureexam.com/CTS-D-pass4sure-exam-dumps.html