2023 Valid SCP-NPM test answers & SolarWinds Exam PDF
Free SolarWinds SCP-NPM Exam Questions and Answer from Training Expert PassSureExam
NEW QUESTION # 29
Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?
- A. SMTP service on the Exchange server
- B. Server component monitor status
- C. Network bandwidth utilization
- D. Mail queue length on the Exchange server
Answer: D
NEW QUESTION # 30
How are Orion agents licensed?
- A. Only Windows agents need to be licensed, Linux is free
- B. Licenses are available in a set of one upon request
- C. No separate license is required
- D. Agents requite the SolarWinds Agent Provisioning module SAP
Answer: A
NEW QUESTION # 31
You created a Universal Device Poller. You want to create an alert based on this custom poller. When you create the alert, you select "I want to alert on: Custom Poller." How would you identify the custom poller within the trigger condition?
- A. Using the enabled status
- B. Using the SNMP get type
- C. Using the Unique Name of your UnDP
- D. Using the MIB used in your UnDP
Answer: C
NEW QUESTION # 32
You receive traps from your network devices and want to alert on a select message. How do you accomplish this?
- A. Go to the Traps view and configure a new Log Viewer rule
- B. Configure Syslog alert actions on the Alert Actions tab
- C. You cannot alert on traps through the Orion Platform
- D. Use Traps in Orion Alerts to configure the default trap alert to fire on the trap message you select to alert on
Answer: D
NEW QUESTION # 33
How can you extend NPM's monitoring to non-standard devices?
- A. Polling with non-standard protocols
- B. Deploying Orion agents
- C. Combining licenses from different products
- D. Using OIDs organized in MIBs
Answer: D
NEW QUESTION # 34
How can you add entities from NPM to monitor for all registered devices in your company domain?
- A. Select to query Domain Controllers in a Network Discovery and then select the Organizational Units (OUs) with the registered devices you want to scan
- B. Add each registered device individually, and then select the entities you want to monitor
- C. Add each of your Domain Controllers as nodes to NPM and scan Active Directory Organization Units (OUs) for the registered devices
- D. Use the NPM Active Directory Discovery tool to find all registered devices on the domain
Answer: C
NEW QUESTION # 35
The finance department asks to view select reports from NPM. Because of compliance policies, you cannot create accounts in the Web Console for users outside of the IT department. How do you allow the finance department to view reports without a user account?
- A. Create a DirectLink account in the Web Console
- B. Create a service account for Finance
- C. Enable the Guest account
- D. Enable the Link only option on the report
Answer: B
NEW QUESTION # 36
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. Enable API polling on the APIC node
- B. Add an APIC node to NPM
- C. View your SDN environment in Orion Maps
- D. Enable API polling on all ACI devices
Answer: B,D
NEW QUESTION # 37
In which scenario is an agent the best solution?
- A. If Native GLX log file monitoring is required
- B. If hosts in distributed networks have overlapping IP addresses
- C. If the WMI ports are already in use on Linux
- D. If you cannot allow ICMP polling on your routers
Answer: A
NEW QUESTION # 38
A custom poller has polled some results from nodes. Which of the following is a possible reason for NOT being able to show the polled results as charts on the Orion Web Console?
- A. The poller is not enabled and assigned to the devices
- B. You must use Device Studio to build the poller
- C. Charts are only supported by out-of-the-box pollers
- D. You did not set the poller to collect historical statistics
Answer: C
NEW QUESTION # 39
Your team member cannot see any reports in the Orion Console. What can cause this issue?
- A. The reports are configured with more than one limitation category
- B. The No Reports limitation is applied to the user account
- C. The Report Writer is not installed
- D. The SQL server is on a different system than the SolarWinds server
Answer: B
NEW QUESTION # 40
You can import device-specific MIBs into the SolarWinds MIB Database, but you cannot import UnDP pollers based on OIDs from device-specific MIBs.
- A. True
- B. False
Answer: B
NEW QUESTION # 41
You want to create a custom poller for a device. When you select the OID you get an "OID not supported" error. What does this mean?
- A. The SNMP agent on the device does not report on this OID
- B. This OID requires the read/write community string
- C. Your firewall is blocking SNMP requests
- D. The SNMP string that you used is incorrect
Answer: A
NEW QUESTION # 42
You monitor three Cisco routers with NPM. NPM reports utilization statistics for two of the routers. NPM only shows Availability and Response Time statuses for the third router. Why do you not see utilization statistics on the third router?
- A. The third node is monitored with the NPM agent
- B. SNMP is not configured correctly on the third node
- C. The third node is monitored with WMI instead of SNMP
- D. The third node is monitored with SNMP instead of ICMP
Answer: B
NEW QUESTION # 43
You can make bulk changes, such as changing the polling method, to nodes.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 44
How can you quickly generate a report in NPM to show the top 50 interfaces by percent utilization?
- A. Copy a similar default report and edit it for the top 50 interfaces
- B. Create a web-based report and filter the data to restrict to the top 50 interfaces
- C. Copy a similar default report and edit it for different time-frames
- D. Create an advanced SQL query report
Answer: A
NEW QUESTION # 45
Which is not true for Device Studio Poller?
- A. Polled values are displayed in existing resources
- B. Can perform logical operations or transformations on the polled data
- C. Collects data from Orion Failover Engine or Hot Standby Engines
- D. Can poll multiple OIDs for a given technology
Answer: A
NEW QUESTION # 46
How do you assign users access to select reports?
- A. Configure the report and add a Report Limitation. Assign the limitation to users who need access to the report
- B. Use custom properties and account limitations to control report access
- C. Create the reports while logged in as each user and set permissions
- D. Save the reports in different sub-directories and set the permissions for each user
Answer: A
NEW QUESTION # 47
Status, Average Response Time, and Packet Loss are the only node details data you can view for your switch A device. The node details of your identical switch B device show Status, Average Response Time, and Packet Loss and other statistics. How can you monitor the other statistics on switch A and not lose any historical data?
- A. Edit the node properties of switch A and change the polling method to "Status Only: ICMP"
- B. Add switch A again without deleting it first, and this time choose "Most Devices: SNMP and ICMP" as the polling method
- C. Delete switch A, and then add it again and this time choose "Most Devices: SNMP and ICMP" as the polling method
- D. Edit the node properties of switch A and change the polling method to "Most Devices: SNMP and ICMP"
- E. Edit the node properties of switch B and change the polling method to "Status Only: ICMP"
Answer: B
NEW QUESTION # 48
You need to build an Orion Map to show the relationships and connections between your Cloud servers and on premise infrastructure. You add the nodes but discover that the Orion Platform is not automatically mapping the connection between your cloud server and on premise router. You have verified that layer 2 and layer 3 topologies are being polled on the devices. How do you resolve this issue?
- A. You need to open the topology ports in your firewall between the on premise node and the cloud node
- B. You need to turn off layer 2 and layer 3 topology polling for cloud monitoring
- C. You cannot monitor the connection between on premise and off premise devices
- D. You need to configure a custom connection between the cloud node and the on premise node
Answer: D
NEW QUESTION # 49
You want to create an alert that notifies you when packet loss meets or exceeds 50%, but only for a select set of nodes in your network. How do you accomplish this?
- A. Create separate SWQL trigger condition for each node to be included in the alert
- B. Set an alert limitation for the nodes to be included in the alert
- C. Set the alert trigger evaluation to evaluate nodes to be included in the alert
- D. Set the scope of the alert to only apply to nodes to be included in the alert
Answer: B
NEW QUESTION # 50
You can use Device Studio to create pollers for CPU and memory?
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 51
......
Top SolarWinds SCP-NPM Courses Online: https://actualtests.passsureexam.com/SCP-NPM-pass4sure-exam-dumps.html